Electric forklift Heli CPD35-GB2LI-M

The CPD35-GB2LI-M model is designed for the transport and lifting of loads weighing up to 3500 kg. The forklift can be equipped with Standard, Duplex, or Triplex masts, with a maximum lifting height of 7500 mm. In the M version, performance and precision are ensured by two motors - a 16.6 kW drive motor (allowing for a speed of 19 km/h) and a 25.5 kW lifting motor.

Lithium-ion battery

The most important component of the Heli CPD35-GB2LI-M forklift is the lithium-ion battery. As standard, this model is equipped with 404 Ah battery and a fast charger with a power of 200 A. This combination allows for approximately 6 hours of forklift operation, with a total charging time of just 2 hours.

Unlike lead-acid batteries, lithium-ion batteries:

- have a short charging time,

- do not require charging in a specially ventilated room,

- are maintenance-free (do not require, among other things, topping up with distilled water),

- do not require maintenance,

- allow for short and occasional recharging, which does not negatively affect the battery's lifespan.

Benefits of Heli CPD35-GB2LI-M

To meet diverse requirements, the operator of the Heli CPD35-GB2LI-M forklift has access to 3 different operating modes: Powerful, Economy, and Energy Saving. Each mode provides different parameters, allowing for the customization of the forklift's operating characteristics to specific applications. Comfort and safety are ensured by the implemented automatic speed reduction system on bends.

In the standard version, the CPD35-GB2LI-M model is equipped with side shift and an additional valve on the mast to prevent fork impact with the ground. With an IPX4 waterproof rating and the option to install a full cabin, the forklift can operate in outdoor environments.

Key advantages:

- Load capacity of 3500 kg,

- Lifting height up to 7500 mm,

- Lithium-ion battery,

- 6 hours of operation (404 Ah battery),

- 2 hours of charging (200 A fast charger),

- Possible 3 operating modes,

- Automatic speed reduction on bends,

- Side shift.